RE: [linux-audio-user] rme9632 status?

New Message Reply About this list Date view Thread view Subject view Author view Other groups

Subject: RE: [linux-audio-user] rme9632 status?
From: Mark Knecht (mknecht_AT_controlnet.com)
Date: Mon Dec 22 2003 - 16:58:07 EET

WR,
   Hi. The info below seems inconsistent. It appears that you have a
Hammerfall card (either 9652 or 9636) and not the HDSP 9632. from the lspci
results. Is this the case?

   If so, you should be loading the driver for the Hammerfall (snd-rme9652)
and not the driver for the HDSP family. (snd-hdsp)

Mark

> -----Original Message-----
> From: linux-audio-user-bounces_AT_music.columbia.edu
> [mailto:linux-audio-user-bounces_AT_music.columbia.edu]On Behalf Of WR
> Sent: Sunday, December 21, 2003 2:38 AM
> To: linux-audio-user_AT_music.columbia.edu
> Subject: [linux-audio-user] rme9632 status?
>
>
> Spent the last few hours reading threads about hdsp firmware and issues,
> and I'm wondering where things are currently at (development seems to
> happen pretty rapidly around here!)...just installed a 9632 rev3, with
> alsa-driver 1.0.0-rc2, and have some way to go, I reckon...
>
> lspci shows:
> 00:09.0 Multimedia audio controller: Xilinx Corporation RME Digi9652
> (Hammerfall) (rev 03)
>
> dmesg:
> RME Hammerfall-DSP: no cards found
>
> # uname -a
> Linux 2.4.22-ck2 #1 SMP Sun Dec 21 00:23:34 PST 2003 i686 AMD Athlon(tm)
> MP Processor 1900+ AuthenticAMD GNU/Linux
>
> What are the currently recommended kernel/alsa/firmware/eprom versions?
>
> alsa-project.org appears to recommend using the hdsp driver instead of
> rme9652 on the 9632 -- is there any reason to use one or the other? Or am
> I reading it wrong...
>
> Thanks for any advice!!
> WR
>
>
>

New Message Reply About this list Date view Thread view Subject view Author view Other groups

This archive was generated by hypermail 2b28 : Mon Dec 22 2003 - 17:01:24 EET