Re: [linux-audio-user] alsa problem

New Message Reply About this list Date view Thread view Subject view Author view Other groups

Subject: Re: [linux-audio-user] alsa problem
From: Rui Nuno Capela (rncbc_AT_rncbc.org)
Date: Sun Jul 18 2004 - 14:15:00 EEST

Hi,

Have you checked that the firmware is being properly loaded? The us-x2y
(us-122 in your case) device has two startup stage steps: the first step
loads the firmware, the second loads a fpga program into device ram, IIRC.
Those steps are contiguous and should commanded by the alsa/hotplug
binding scripts. Most important then, you need fxload, alsa-tools and
alsa-firmware packages correctly installed.

Bye. 

-- 
rncbc aka Rui Nuno Capela
rncbc_AT_rncbc.org

> pepe-e
> hi to you all.
>
> could anyone help me with this?
>
> i'm trying to get my tascam us-122 running on slackware.
>
> the lsmod says:
>
> Module                  Size  Used by    Not tainted
> snd-seq                42384   0  (autoclean)
> snd-pcm-oss            39880   0  (unused)
> snd-mixer-oss          13912   0  [snd-pcm-oss]
> snd-usb-usx2y          14820   0  (unused)
> snd-hwdep               5284   0  [snd-usb-usx2y]
> snd-usb-audio          51104   0  [snd-usb-usx2y]
> snd-pcm                68324   0  [snd-pcm-oss snd-usb-usx2y
> snd-usb-audio]
> snd-timer              17220   0  [snd-seq snd-pcm]
> snd-rawmidi            15268   0  [snd-usb-audio]
> snd-seq-device          4436   0  [snd-seq snd-rawmidi]
> snd                    36900   0  [snd-seq snd-pcm-oss snd-mixer-oss
> snd-usb-usx2y snd-hwdep snd-usb-audio snd-pcm snd-timer snd-rawmidi
> snd-seq-device]
> soundcore               4452   0  [snd]
> snd-page-alloc          6840   0  [snd-usb-usx2y snd-pcm]
> uhci                   28316   0  (unused)
> usbcore                43108   0  [snd-usb-usx2y snd-usb-audio uhci]
>
> to my limited knowledge it says that the card is installed and up. the
> problem is that there is no sound. either does the card show in f ex
> xmms options.
>
> alsamixer announces:
>
> alsamixer: function snd_ctl_open failed for default: No such device
>
> have i missed something during the alsa installation. i'm on slackware
> on 2.4.25-kernel which i patched according to the instructions on the
> linux audio users guide page. i'd be really grateful if someone could
> come with an advice on how to get this working...
>
> my modules.conf:
>
>
>
> # ALSA portion
> alias char-major-116
> alias snd-card-0 snd-usb-usx2y
> # module options should go here
>
>
> # OSS/Free portion
> alias char-major-14 soundcore
> alias sound-slot-0 snd-card-0
>
>
> # card #1
> alias sound-service-0-0 snd-mixer-oss
> alias sound-service-0-1 snd-seq-oss
> alias sound-service-0-3 snd-pcm-oss
> alias sound-service-0-8 snd-seq-oss
> alias sound-service-0-12 snd-pcm-oss
>
>
> remember your spirit with pepe-e
>

New Message Reply About this list Date view Thread view Subject view Author view Other groups

This archive was generated by hypermail 2b28 : Sun Jul 18 2004 - 14:19:37 EEST