Thanks a lot for you reply, also to Arnold and Clemens.
My audio problem is solved :-) But not my MIDI problem :-(
On Friday 10 March 2006 00:27, Rui Nuno Capela wrote:
> > I've seen some earlier messages in this list about Rosegarden not showing
> > up in the "Readable Clients / Output ports" tab in QJackCtl; that's the
> > same with me, but not of the suggestions so far helped me.
> >
> > The TASCAM_X2Y shows up as readable and as writable client in MIDI,
> > together with MIDI Through-0. Rosegarden only as Writable.
> >
> > In the audio tab, I've got alsa_pcm and rosegarden at both sides, but the
> > only way I can get audio signal is by connecting the Tascam's Line-Out to
> > my soundcard's line-in :-(
>
[...]
> Check which PCM audio device interface (hw:n) have you set on QjackCtl
> setup (the [>] button is your friend ;)
Found myself a good friend there indeed :-) I've got audio directly from my
USB interface now.
But MIDI signal still doesn't come through. When I list all available MIDI
clients I get:
[oscar@email-addr-hidden ~]$ aconnect -o
client 62: 'Midi Through' [type=kernel]
0 'Midi Through Port-0'
client 72: 'TASCAM US-X2Y' [type=kernel]
0 'TASCAM US-X2Y MIDI 1'
client 129: 'FLUID Synth (6160)' [type=user]
0 'Synth input port (6160:0)'
client 130: 'Rosegarden' [type=user]
0 'Rosegarden input'
[oscar@email-addr-hidden ~]$
So rosegarden has a writable port, but it's not listed as readable:
[oscar@email-addr-hidden ~]$ aconnect -i
client 0: 'System' [type=kernel]
0 'Timer '
1 'Announce '
client 62: 'Midi Through' [type=kernel]
0 'Midi Through Port-0'
client 72: 'TASCAM US-X2Y' [type=kernel]
0 'TASCAM US-X2Y MIDI 1'
[oscar@email-addr-hidden ~]$
The writable port is connected:
[oscar@email-addr-hidden ~]$ aconnect -ol
client 62: 'Midi Through' [type=kernel]
0 'Midi Through Port-0'
Connecting To: 130:0
Connected From: 130:1
client 72: 'TASCAM US-X2Y' [type=kernel]
0 'TASCAM US-X2Y MIDI 1'
Connecting To: 130:0
Connected From: 130:1
client 129: 'FLUID Synth (6160)' [type=user]
0 'Synth input port (6160:0)'
Connected From: 130:1
client 130: 'Rosegarden' [type=user]
0 'Rosegarden input'
Connected From: 0:1, 72:0, 62:0
[oscar@email-addr-hidden ~]$
Do I need to create ports somewhere in Rosegarden?
Thanks in advance,
Oscar
Received on Sat Mar 11 20:15:07 2006
This archive was generated by hypermail 2.1.8 : Sat Mar 11 2006 - 20:15:07 EET