Gabriel M. Beddingfield wrote:
>
> On Wed, 17 Feb 2010, Dave Phillips wrote:
>
>> If anyone here is using SooperLooper or Freewheeling or Kluppe with a
>> MIDI foot controller (or any MIDI controller), please let me know what
>> hardware you're using. I'm thinking about purchasing a device, I'd like
>> to know what's recommended by LAU's lusty live loopers. :)
I have (and can recommend) the fcb1010. Didn't use it that much, but I
plan to!
> My typical live SL setup is two stereo loops with the dry
> signal passing through clean. I control it like this:
Thanks for the info. I hope to play with sooperlooper + fcb1010 soonish,
maybe Dave's article would be a good place to start.
> There is Java-based editor for the FCB-1010, but it only
> supports a customized firmware called "UNO". It is in many
> ways superior to the Behringer firmware... and well-worth
> the $14. However, I've been using the older, buggier,
> factory firmware (v1.0) and it works just fine for me.
Hmm, I normally like to keep things as standard as possible, but this
sounds like it could be something to try.
-- Atte http://atte.dk http://modlys.dk _______________________________________________ Linux-audio-user mailing list Linux-audio-user@email-addr-hidden http://lists.linuxaudio.org/listinfo/linux-audio-userReceived on Thu Feb 18 16:15:04 2010
This archive was generated by hypermail 2.1.8 : Thu Feb 18 2010 - 16:15:04 EET