Re: [LAU] looking for command-line/scriptable mastering software

From: Fons Adriaensen <fons@email-addr-hidden>
Date: Fri Nov 23 2012 - 12:34:04 EET

On Thu, Nov 22, 2012 at 10:26:10PM -0500, Grekim wrote:

> /Maybe neat on headphones, but definitely the wrong thing for
> reproduction on speakers. Also bad for mono compatibility.
> And since it's closed source it's not possible to change
> this to normal panning, which would be a trivial exercise
> otherwise./
>
> I'd like to learn more about why it's so wrong.

There's no one-line answer to that. To understand why it's wrong
you have to work out how the signals from the two speakers combine
at the ears and compare the result to what happens for a real
sound source.

For low frequencies the analysis is very simple, you can do it
in two minutes just using pencil and paper. Just do it and you'll
see. For mid an high frequencies it gets considerably more complex
and a lot of psycho-acoustics is involved. The results go against
simple intuition, which is why many people have some difficulty
accepting them.

Also consider to what happens when the stereo signals are summed
to mono. If your panner is set slightly off-center, L and R will
have nearly the same gain (since they need to be identical for
a center source) and a delay between them of a fraction of a
millisecond or so. Summing L and R will result in quite strong
comb filter effects.

> /I've got ~3TB of floating point files here, and I'm not going
> to convert them just to be able to use a particular - any - SW./
>
> Why did you record in floating point format if your A/D converters are not?

Because I do not just record signals directly from the A/D converters,
but also signals that have already had some processing and probably
will have some more later. All serious audio processing in Linux (and
in almost all environments where audio is processed digitally) is done
in floating point format, for good reasons. Why should I convert each
time I read or write a file ? That would only add errors.

A/D and D/A converters are probably the only components in the chain
that 'naturally' use an integer format. But even that isn't really
true any more. Most high quality converters are not just the bare
converter and an analog filter. They have some digital processing
going on between the SW interface and the actual converters, e.g.
most of the anti-alias filtering will be done digitally in an
oversampling converter. And that processing could very well be done
in FP format these days. Some high end sound cards (e.g. RME) have
native floating point interfaces.

There is nothing magic about the 2^16 or 2^24 analog levels that
correspond exactly to integer sample values. Change your gain by
0.1 dB and they will be an entirely different set, as good or as
bad as any.

> /
> The summing being exact is quite irrelevant if the rest isn't,
> and doesn't need to be anyway./
>
> Sorry it's not relevant to you. Aside for the latest version which
> does use ALSA, I have about 4 C header files. So there's no libsend
> file or anything like that.

You could probably eliminate a lot of code by using something like
libsndfile. And you would at least be able to read floating point
files.

If all filtering, effects, etc. is done in FP format, it's plain
silly to convert to integer just to add some values. And adding
also happens even when you don't see it explicitly. Any linear
filter is defined by its impulse response. Depending on the type
of filter that could be hundreds or even thousands of samples long.
So every output sample is a weighted sum of hundreds or thousands
of input samples even if not computed explicitly that way. Are you
really claiming that doing that in FP is OK while adding a few
signals on a mix bus isn't ?

Regarding the latter, it may also help to analyse the situation a
bit more rigorously before jumping to easy conclusions. It involves
a bit of maths, but nothing esoterical.

> /OK, then the info on your site is out of date.../
>
> Don't think so.

Quote from the Quick Start Guide:

 There are 3 text files that control Mixer4 and they must be kept
 in the same directory, at least for now, as the Mixer4 executable.

Ciao,

-- 
FA
A world of exhaustive, reliable metadata would be an utopia.
It's also a pipe-dream, founded on self-delusion, nerd hubris
and hysterically inflated market opportunities. (Cory Doctorow)
_______________________________________________
Linux-audio-user mailing list
Linux-audio-user@email-addr-hidden
http://lists.linuxaudio.org/listinfo/linux-audio-user
Received on Fri Nov 23 16:15:01 2012

This archive was generated by hypermail 2.1.8 : Fri Nov 23 2012 - 16:15:01 EET